Renthal FatBar

Print
PDF

Renthal FatBar's are used by almost all the world's top off-road riders, not just in Motocross and Supercross, but also in Enduro, trials and speedway. A rider using Renthal products purchased from their local retailer uses exactly the same parts as those used by the best riders in the world.

The Renthal Fatbar features a tapered outer wall with a 1 1/8” clamping diameter and 7/8” diameter at control ends. This profiled wall and crossbar less design combines excellent strength with good flexing characteristics and excellent bending resilience, giving you one more choice in handlebar selections.

  • 7010 T6 Aluminum
  • Shot peened surface finished to help prevent fatigue or failure
  • Knurled grip area for better grip bond
  • 15 step anodized finish for corrosion resistance
  • Laser etched position grid

Available in 5 cool color options: Black, Blue, Red, Orange, Titanium and your choice of 12 different bends. Check our bar bend chart for dimensions.

Why are Renthal off-road products so successful? Renthal off-road racing products are designed and engineered specifically for off-road use and are then exhaustively tested by the world's best riders as part of the development process.

  

Bend Chart

Recommendations for Bar Bends

Handlebars are a critical part of bike setup and everybody has different preferences. There are a few basic things to consider when setting up a bike with new bars. These are just observations we have made since we deal alot with setting up the controls. Remember everybody has a different preference.

1. Height of the rider (taller riders usually need taller bars or bar positions)

2. Type of riding (depending on where you ride woods, desert, moto etc. Woods riders tend to sit more and may prefer a bar with more sweep. Desert riders stand and sit both and a neutral sweep bar may be a better choice. Moto riders tend to stand in the attack position more and a bar with less sweep "straighter" might be a better choice.

FatBar Bend Chart

The chart below will help you determine what bend handlebar you are looking for.

Model
Part No
A
WIDTH
B
HEIGHT
C
RISE
D
CLAMP AREA
E
SWEEP
CR HIGH /ATV  605-01 795mm
31.29"		 95mm
3.74"		 70mm
2.75"		 205 62mm
2.44"
Enduro  745-01 780mm
30.70"		 99mm
3.90"		 65mm
2.56"		 200 54mm
2.13"
Honda mx  604-01 802mm
31.57"		 99mm
3.90"		 65mm
2.56"		 200 54mm
2.13"
Kawasaki mx  604-01 802mm
31.57"		 99mm
3.90"		 65mm
2.56"		 200 54mm
2.13"
KFX 450R 2008  814-01 769mm
30.28"		 96mm
3.78"		 64mm
2.52"		 120 72mm
2.83"
KTM LC4 2002  617-01 808mm
31.81"		 105mm
4.13"		 60mm
2.36"		 178 80mm
3.15"
KTM Low  686-01 811mm
31.93"		 85mm
3.35"		 47mm
1.85"		 185 36mm
1.42"
KTM SX/MX 2004-2007  608-01 808mm
31.81"		 95mm
3.74"		 70mm
2.75"		 190 38mm
1.50"
MC  603-01 803mm
31.61"		 92mm
3.62"		 56mm
2.20"		 210 57mm
2.24"
Mini mx  671-01 740mm
29.13"		 118mm
4.65"		 83mm
3.27"		 175 42mm
1.65"
Mx Low  672-01 796mm
31.33"		 80mm
3.15"		 55mm
2.17"		 210 57mm
2.24"
RC  604-01 802mm
31.57"		 99mm
3.90"		 65mm
2.56"		 200 54mm
2.13"
RC High  609-01 802mm
31.57"		 119mm
4.69"		 80mm
3.15"		 200 54mm
2.13"
RM125/250/450F 2006-2007  672-01 796mm
31.33"		 80mm
3.15"		 55mm
2.17"		 210 57mm
2.24"
Street Fighter  814-01 769mm
30.28"		 96mm
3.78"		 64mm
2.52"		 120 72mm
2.83"
Supermoto Racer  604-01 802mm
31.57"		 99mm
3.90"		 65mm
2.56"		 200 54mm
2.13"
Trials (742 Equivalent)  673-01 820mm
32.28"		 100mm
3.94"		 65mm
2.56"		 165 50mm
1.97"
Yamaha YZ 125-450F 2007  602-01 795mm
31.29"		 90mm
3.54"		 65mm
2.56"		 205 62mm
2.44"